Things Are About To Get a Lil Crazy In Here........
Things Are About To Get a Lil Crazy In Here........
All your sandvichs are belong to me now,
Hopefully my European brethren (and Toco) will allow me to be here, if not, thank you for letting me be here for a full 5 minutes........
Ill be sure to not spam the forums like a little prick as some would say...
Hopefully my European brethren (and Toco) will allow me to be here, if not, thank you for letting me be here for a full 5 minutes........
Ill be sure to not spam the forums like a little prick as some would say...
Re: Things Are About To Get a Lil Crazy In Here........
BTW : need a few tips on how to turn demos into Youtube vids if anyone can help me thnx
- HankVenture
- Posts: 100
- Joined: Thu Nov 27, 2008 5:08 pm
- Location: Massachusetts, AMERICARR
Re: Things Are About To Get a Lil Crazy In Here........
Welcome mateCrazy_Ed wrote:BTW : need a few tips on how to turn demos into Youtube vids if anyone can help me thnx
- Toco
- Posts: 4454
- Joined: Fri Apr 18, 2008 1:46 am
- What is 3hirty p1us 4orty?: 70
- Location: The frozen north on an ice flow
Re: Things Are About To Get a Lil Crazy In Here........
just dont piss ppl off and we will get along fine, when someone says stfu guess what u should do....
Re: Things Are About To Get a Lil Crazy In Here........
Hi Crazy
unless its an admin and then just serve your 5 minute ban like the good little boy you are!
Tell them to "suck my balls"!!! Abuse in jest tends to fair well!Toco wrote:just dont piss ppl off and we will get along fine, when someone says stfu guess what u should do....
unless its an admin and then just serve your 5 minute ban like the good little boy you are!
- Sharp Dagger
- Posts: 1553
- Joined: Sun Dec 07, 2008 2:56 pm
- What is 3hirty p1us 4orty?: 4
Re: Things Are About To Get a Lil Crazy In Here........
i beleive i made a post on how to use demos to make a low quality massive file size video XD
hang on
i made a tutorial for neotokyo recording .
ill translate it into TF2
press the load button and find whatever you called you're recording (it will be below the folders)
the game will then load the demo, and when its loaded press pause.
find just before what you want to record.
press play until your maybe 100 frames before the event then pause.
say i was on frame 1257 i would want to start recording on frame 1307
Step 5.
press the edit button and a box will come up.
press New and select "playcommands"
Now ANOTHER box will come up. name it anything you want and in the middle box change it to playontick and type in the tick you want to start recording it on.
for instance I would type in 1307
In the box below it type.
Press OK and then make another command (if when you press new it flashes then goes away, click on the previous command then press new.
again select playcommands.
in the name box type anything other than what you just write.
select playontick and in the tick box, select the tick that you want to finish recording on (DO NOT SELECT THE LAST TICK OF THE DEMO)
as the commands write
Press O.K
Close the edit box and the demoui box.
Step 6.
In the console type
close the console.
make sure there are no boxes left on the screen
press .
When it gets to the first tick it should go SUPER LAGGY, and the audio will just loop the last second.
this is supposed to happen, it won't come out like that in the final thing.
when you get to the last tick, it will pause. Wait about a minute for it to finish, then to make sure its finished, press the console button.
if the console comes up then press quit game.
Step 7.
Download and extract VirtualDub (top of the post)
run VirtualDub.exe
A screen should appear.
press open video file and go to your, Steam/steamapps/sourcemods/neotokyo folder and select nameofmovie0000.tga
it will now load all the files with nameofmovie at the start.
Step 8.
In the tabs at the top select audio, and select audio from another file...
Click nameofmovie.wav
Then click the audio tab again and select Full Processing mode.
Once more click the audio tab and select interleaving.
make sure the first box has a 0 in it, then unselect the "enable audio/video interleaving".
close the interleaving window and press the audio tab AGAIN (I Promise this is the last time)
and press compression
Click on Microsoft AD826, And select either of the options in the right hand box.
Step 9.
select the video tab and press frame rate.
in the window that pops up select Change so the video and audio durations match. (29.something FPS)
Press OK.
Click the video tab again and select compression.
(You should now have XVID codec installed.)
In the left hand box go to the bottom of the box and then select XVID codec.
Click the video tab once more and select full processing mode.
Now click save as AVI.
Call it anything you want and put it in any folder.
It will then load a window and start doing something.
When its finished close the windows and close VirtualDub.
find you .avi file and open it.
That should be the file you just made.
If you make lots of clips, then put them in Windows Movie Maker or something.
FIN!
Tips:
If you want to get rid of your hud then before running the startmovie, type in console
the endmovie command should stay the same.
E.G
When you get to the starting tick a window will pop up. Go to the bottom of the list and select XVID codec.
press OK.
when finished, in your steamapps/sourcemods/neotokyo folder there will be nameofmovie.avi[/code]
hang on
i made a tutorial for neotokyo recording .
ill translate it into TF2
Code: Select all
Sharp Dagger's Source recorder tutorial.
In this tutorial I will be covering how to use source recorder to record TF2 movies/Machinama.
Step 1.
What to download.
You will only need a couple of things for source recorder and if your doing it straight to avi, you only need one.
Virtual dub.
http://virtualdub.sourceforge.net/
Xvid codec
http://www.xvid.org/Downloads.15.0.html
Due to new size uploads, youtube can now uplaod anything up to 2GB of video :D
so you don't really need to lower the quality (as long as you're using XVID codec)
Step 4.
Put all of the graphics up to full. In console type
[code]mat_picmip -9; r_rootlod 0
the game will then load the demo, and when its loaded press pause.
find just before what you want to record.
press play until your maybe 100 frames before the event then pause.
say i was on frame 1257 i would want to start recording on frame 1307
Step 5.
press the edit button and a box will come up.
press New and select "playcommands"
Now ANOTHER box will come up. name it anything you want and in the middle box change it to playontick and type in the tick you want to start recording it on.
for instance I would type in 1307
In the box below it type.
Code: Select all
sv_cheats 1; host_framerate 30; startmovie nameofmovie
again select playcommands.
in the name box type anything other than what you just write.
select playontick and in the tick box, select the tick that you want to finish recording on (DO NOT SELECT THE LAST TICK OF THE DEMO)
as the commands write
Code: Select all
demo_pause;host_framerate 0; endmovie
Close the edit box and the demoui box.
Step 6.
In the console type
Code: Select all
bind . "demo_resume"
make sure there are no boxes left on the screen
press .
When it gets to the first tick it should go SUPER LAGGY, and the audio will just loop the last second.
this is supposed to happen, it won't come out like that in the final thing.
when you get to the last tick, it will pause. Wait about a minute for it to finish, then to make sure its finished, press the console button.
if the console comes up then press quit game.
Step 7.
Download and extract VirtualDub (top of the post)
run VirtualDub.exe
A screen should appear.
press open video file and go to your, Steam/steamapps/sourcemods/neotokyo folder and select nameofmovie0000.tga
it will now load all the files with nameofmovie at the start.
Step 8.
In the tabs at the top select audio, and select audio from another file...
Click nameofmovie.wav
Then click the audio tab again and select Full Processing mode.
Once more click the audio tab and select interleaving.
make sure the first box has a 0 in it, then unselect the "enable audio/video interleaving".
close the interleaving window and press the audio tab AGAIN (I Promise this is the last time)
and press compression
Click on Microsoft AD826, And select either of the options in the right hand box.
Step 9.
select the video tab and press frame rate.
in the window that pops up select Change so the video and audio durations match. (29.something FPS)
Press OK.
Click the video tab again and select compression.
(You should now have XVID codec installed.)
In the left hand box go to the bottom of the box and then select XVID codec.
Click the video tab once more and select full processing mode.
Now click save as AVI.
Call it anything you want and put it in any folder.
It will then load a window and start doing something.
When its finished close the windows and close VirtualDub.
find you .avi file and open it.
That should be the file you just made.
If you make lots of clips, then put them in Windows Movie Maker or something.
FIN!
Tips:
If you want to get rid of your hud then before running the startmovie, type in console
Code: Select all
cl_showhud 0; hud_saytext_time 0; hud_deathnotice_time 0
P.S No Fraps Vs Source recorder trolling.
EDIT: when i tried this on Neotokyo it crashed
Method 2. No .TGA Files, goes straight to .AVI, No VirtualDub
Make sure when you make the movie, your running in a window.
do the same as above up to step 5.
On step 5 add "avi" after you're movie name.
E.G
[code]sv_cheats 1; host_framerate 30; startmovie nameofmovie avi
E.G
Code: Select all
demo_pause;host_framerate 0; endmovie
press OK.
when finished, in your steamapps/sourcemods/neotokyo folder there will be nameofmovie.avi[/code]
- HitmanTJ03
- Posts: 478
- Joined: Thu Mar 05, 2009 5:53 pm
- Location: UK
Re: Things Are About To Get a Lil Crazy In Here........
Wrong thread?
The Game.
THIS ISN'T STRAWBERRY, IT'S RAWBERRY
- Sharp Dagger
- Posts: 1553
- Joined: Sun Dec 07, 2008 2:56 pm
- What is 3hirty p1us 4orty?: 4